The basic concept behind laser lift off is the difference in absorption of the laser light by one layer, typically a host substrate, and the filmstack being separated. In the case of LEDs for example, the GaN epi layer has a band gap of about 3.3 eV whereas the sapphire band gap energy is ~ 9.9 eV. Short wavelength laser light passes through the sapphire, and ablates the 

interface when it couples with the GaN, thereby releasing the two materials.  In order to achieve successful lift off beam quality and control are important. At IPG, innovative beam delivery techniques are implemented to achieve high-speed, high-yielding production processes.

Laser Lift Off

A laser light source is projected through a transparent material and is absorbed in an adjacent material on the backside, such as GaN on Sapphire.  Confined plasma at the interface results in lift-off or separation of the materials

355nm UV pulsed lasers Lift Off of Polymer on Glass

Transfer of 3D wafer-based electronic device structures and polymer-based active matrix display panels such as AMOLED for smartphones (polymer backplane). Figure shows separation of 15 µm thick polyimide using a 355nm scanned laser.

Monolithic Advanced Lift Off in GaN

파장이 짧고 에너지가 높은 광자는 더 잘 흡수되어 GaN과 같은 특정 재료에서 광학 침투 깊이가 더 얕아집니다. UV 펄스는 열 침투 깊이를 최소화해야 하는 경우 박막 반도체 재료의 분리에 사용할 수 있습니다.

355nm UV 펄스 레이저란: https://www.rfhtech.com/s9-series-3w-5w-10w-uv-laser_p9.html