How to solve the problem of 532nm dpss laser cutting failure?

The laser cutting machine can produce exquisite objects through its own energy. But long-term use of the cutting machine will cause failures.

Through the video, we can see that the cutting machine failed to cut the material during the operation.Next, we solve the problem in turn.

1、Adjust software parameters

1. Adjust the control panel

2. Adjust RDWorks cutting software

We can adjust the parameters of the machine through the control panel and RDWorks cutting software .

2、Check lens

At the same time, Stain on the reflective lens will cause the reflectance to drop, If there are stains, you need to wipe them with a clean soft cloth and alcohol.

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

3、Check laser light path

The light path will also affect the cutting effect. After wiping or replacing the lens, if the cutting is still not successful, you can check the light path to ensure that the light is correct.

4、Adjust the power of laser tube and power supply

재료가 너무 두꺼우면 속도를 1로 줄인 후에도 여전히 깨끗하게 절단할 수 없습니다.출력을 높이고 레이저 튜브와 전원 공급 장치를 교체해야 합니다.다음으로 레이저를 교체하는 단계에 대해 알아볼 수 있습니다. 비디오를 통한 튜브 및 전원 공급 장치.

기계를 사용하는 동안 여전히 의심이 가는 경우 메시지를 남기거나 전화를 주시면 기꺼이 도와드리겠습니다!