We can engraved a wide range of materials such as: plastics wood, metal, leather, fabric, silicone, rubber, cardboard and more. With our high end machinery we can range from very delicate engraving that will gentely mark the surface to a powerful yet accurate and controlled engraving that can get deeper into the material evaporating mass to get more distinguished and dramatic results. Our engraving technology is the best available today and is designed for best quality as well as for mass production.

Laser engraving does not add any paint the material, but rather burns the surface of the material and thus changes the texture of the surface. The resulting appearance is a change of color between the burned area and the rest of the material and is differs in each material.

Laser Engraving on wood

Engraving on a wood is actually possible on all types of woods. For quality results, the engraving area should be flat and free of defects. A number of other parameters affect the result. The shade of the the wood, The homogeneousness level of the wood, the moisture level, the density of the wood, the amount of natural oils in it etc.

In many cases it is recommended to apply teak oil or varnishes after laser engraving in order to accentuate the etching and emphasize the natural texture of the wood as well as protecting the exposed layer.

Applications - furniture decoration, wooden tags, logo etching on wooden products, indoor and outdoor signage, design elements and more.

Engraving on acrylic

Acrylic engraving, allows both surface marking and material layers to be removed according to the desired graphics. Transparent Plexiglas (CAST) loses transparency in the etching area and becomes white. Colored plexiglass loses its shine and whitens slightly in the etching area. The engraving depth can be controlled relatively well, creating grooves or reliefs at a depth of several millimeters.

Applications - marking products, creating sockets for screw heads, creating 3D templates and more.

Engraving on double-layered ABS plastic

Double-layered plastic is usually used for signs and labeling, and comes in a number of colors, with the thin top layer engraved exposing the deeper layer.

Applications - Signs, lables for electrical boards, marking shelving, barcode labels, engraved tags.

바코드  각인

바코드는 다른 라벨, 제품 및 부품에 빠르고 명확하며 정확한 방식으로 새겨질 수 있어 내구성이 뛰어나고 자외선 차단 제품이 됩니다. 각인된 부분에는 바코드 외에 가변적인 텍스트 정보를 추가할 수 있으며, 가변적인 데이터의 경우 어떠한 경우에도 원하는 결과에 맞게 디자인을 커스터마이징 해드립니다.

응용 분야  - 라벨링, 표면 인식 라벨, 마킹 박스, 제품 마킹 등.