UV 레이저 마킹 기계가 비싼 이유는 ​​무엇입니까 ?

시장에 나와 있는 파이버 레이저 마킹 기계와 이산화탄소 레이저 마킹 기계는 저렴하고 수명이 길며 유지 관리가 쉽고 환경 요구 사항이 낮습니다. 그렇다면 UV 레이저 마킹기는 왜 그렇게 비쌀까요? 그에 비해 수명은 짧고 유지보수는 더 세심하죠? RFH LASER는 UV 레이저 마킹기가 비싼 이유를 소개합니다.

자외선 레이저 마킹기의 구조는 파이버 레이저 마킹기의 구조와 동일합니다. 자외선 레이저, 검류계, 렌즈, 산업용 컴퓨터, 제어 카드, 작업대 케이싱, 전자 제어 장치, 전원 공급 장치, 적색광, 페달, 수술 용 거울 및 기타 순정 부품으로 구성되어 있으므로 가격이 몇 배나 UV 레이저 마킹 머신은 파이버 레이저 마킹 머신의 가격입니까?

자외선 레이저  | 녹색 레이저  | 자외선 레이저  | 자외선 dpss 레이저  | 나노초 레이저  | UV 레이저 소스  | 고체 레이저

UV 레이저의 가격은 파이버 레이저의 몇 배입니다.

The optical components of fiber laser marking machine and ultraviolet laser marking machine cannot be used in common. The wavelength of ultraviolet laser is 355nm, and the wavelength of fiber laser is 1064nm. The wavelength of ultraviolet laser is the wavelength after frequency multiplication on the basis of 1064nm wavelength through technology. The technical difficulty is higher, which causes the price of UV lasers to be several times that of fiber lasers;

The galvanometer and lens of the UV laser marking machine are also more expensive

The galvanometer and lens of the UV laser marking machine are different in thickness and material than the fiber laser marking machine, so they cannot be used universally. The galvanometer and lens of the UV laser marking machine are also more expensive. Of course, the conventional galvanometer on the market The price difference between the lens and the two equipment is not big, the main price difference is between the ultraviolet laser and the fiber laser.

Ultraviolet laser has a very small focus spot and a small processing heat-affected zone

On the other hand, UV laser marking machines have relatively higher environmental requirements, especially water-cooled lasers, which need to be kept at a constant temperature, so they have higher requirements for accessories. Due to the extremely small focusing spot and the small processing heat-affected zone, the ultraviolet laser can perform ultra-fine marking and special material marking. It is the preferred product for customers who have higher requirements for marking effects. In addition to copper materials, UV lasers have a wider range of materials suitable for processing. Not only the beam quality is good, the focused spot is smaller, and ultra-fine marking can be realized; the scope of application is wider; the heat-affected area is extremely small, no thermal effect is generated, and no material scorching problem occurs.

Depending on the development of UV laser manufacturers and the development of market applications

The overall combination results in the relatively expensive price of the UV laser marking machine, which is mainly reflected in the high cost of the UV laser, and the later labor costs are also relatively large.

So the UV laser marking machine is expensive, what is the current price? It is mainly determined by the price fluctuations of UV laser manufacturers. For example, in the early years, there was no UV laser manufacturer in China, and a 3w imported UV laser also required hundreds of thousands. With the breakthrough of domestic technical barriers, 3w UV lasers The price has also dropped significantly. So far, only tens of thousands of yuan has been used for purely imported top-level ultraviolet lasers. Therefore, the price trend of UV laser marking machines currently depends on the development of the overall domestic UV laser manufacturers and the development of market applications.